Overview

This article describes how to set boundary offsets and create obstructions.


Setting Boundary Offsets

  1. In Project Setup, click on Offsets
  2. Scroll down to Boundary Offsets, choose a region and define the offset distance
  3. Click on the Create button


Creating Obstructions

  1. In Project Setup, click on Offsets
  2. Scroll down to Obstruction Offsets
  3. Go to the Tools Menu on the right, select the Draw Tool Kit > Draw Circle/Square/Rectangular Keepout and draw your obstruction
  4. Click on the Select tool and click on the created obstruction. The obstruction will be highlighted in yellow
  5. Go back to Obstruction Offsets in the left menu and click on the green Create button

Jump to top of article